---

QUESTIONAIRE: REACTION VESSELS

---

Questionaire concerning reaction vessels

Please answer the questions and send the filled out questionaire to us. In consideration of your information we will work out an offer with a drawing an send it to you as sson as possible.

1) Working temperature of the reactor		° C
2) Specification of the reaction vessel
a) Volume of the reaction vessel		Liter
b) Diameter of the flange (system SCHOTT)	NW60 NW100 NW120 NW150 NW200
c) Single sided reaction vessel	Yes
d) Double sided reaction vessel (temperable)	Yes
e) If it is double sided reaction vessel, which kind of joining for coolants is needed	DN 15 saddle flange GL 18 with plastic olive
e) Metal adapter DN 15 saddle flange to thermostat hoses	Yes
2.1) Bottom outlet
Kind	Industrial valve type "J" Laboratory valve type "L" (Torion) Spherical ground joint "S 40" (specify size) Customer requirement (see below)
on spherical ground joint, specify size
on customer requirement (e.g. flange)
3) Lid
a) Kind of lid	none Standard glass Special lid stainless steel
b) Size of lid	NW60 NW100 NW120 NW150 NW200
c) Joint centered for dynamic seal	Standard ground joint NS14/23 Standard ground joint NS29/32 Standard ground joint NS45/40 Glass joint GL14 Glass joint GL18 Glass joint GL25 Flange DN10 Flange DN15 Flange DN25
d) Joints at side straight	Standard ground joint NS14/23 Standard ground joint NS29/32 Standard ground joint NS45/40 Glass joint GL14 Glass joint GL18 Glass joint GL25 Flange DN10 Flange DN15 Flange DN25
e) Joints at side oblique (Count: )	Standard ground joint NS14/23 Standard ground joint NS29/32 Standard ground joint NS45/40 Glass joint GL14 Glass joint GL18 Glass joint GL25 Flange DN10 Flange DN15 Flange DN25
4) Fastening system
for reactor and lid	none Quick release clamp made of stainless steel Double holder "Vario-Grip" Supporting device for installation in supporting frame
5) Stirrer
a) Material for stirrer	none Glass Stainless steel Stainless steel with coating
b) Kind of stirrer	Anchor stirrer Propeller stirrer Plate stirrer Customer requirement
on customer requirement
c) Stirrer shaft	8 mm 10 mm 16 mm Special shaft
6) Dynamic stirrer seals
for stirrer	Yes
7) Coupling
for stirrer	Yes
8) Acessories
a) Supporting frame	none normal drivable Custommes command
b) Metal hoses, thermally insulated, M16x1 threaded joints on both sides, matches to standard threads of circulation thermostats, max. operating temperature 300°C	none 0,5 m 1,0 m 1,5 m 2 m Customer requirement Customer requirement m
9) Room for notes or additional customer requirements
Sender
Firma
Department (if any)
Anrede	Mr. Ms.
name, Surname
Street
City, ZIP
Country
Phone
Fax
Email

© 2003-2008 KGW-ISOTHERM. ALL RIGHTS RESERVED.